Une question ? 06 20 02 80 87
» » » » Récepteur 8 voies Diversity EzUHF 433MHz Immersion RC
Récepteur 8 voies Diversity EzUHF 433MHz Immersion RC

Récepteur 8 voies Diversity EzUHF 433MHz Immersion RC

Reference - EzUHF8DIV
Note moyenne : 0 avis
139.95 €

Récepteur 8 voies Diversity UHF 433MHZ pour le Long range. Superbe produit technologique.
NB: fourni avec 2x antennes 433MHz

Partager :
Notes et avis

Récepteur 8 voies Diversity EzUHF 433MHz Immersion RC


Avertissement :

L'utilisation et le fonctionnement de ce produit peut nécessiter une licence de radio amateur ou être meme interdit d'utilisation selon le pays. FLASH RC décline toute responsabilité dans l'utilisation de ce matériel.
L'utilisateur doit bien vérifier s'il peut ou non utiliser ce matériel dans son pays.


Caractéristiques :

Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
433MHz/70cm Ham band operation
-112dBm Sensitivity
Bi-directional ready (contains onboard transmitter)
Diversity Antenna configuration
ceramic filtered inputs, eliminates nearby high-power video Tx interference
Mikrokopter mode, emits PPM on a chosen channel
Vehicle mode, couples two chosen channels (ideal for coupling steering servos on monster trucks)
USB Connection for easy firmware upgrades, and advanced configuration
EzLink connection to a EzOSD, providing in-flight display, and telemetry down-linked parameters:
-RSSI Ant 1, Ant 2
-Frequency Error
-SNR for each freq. bin
-Link Quality
Standard SMA antenna connectors, compatibility with standard 433/70cm band antennas
8 standard servo connectors
Failsafe, preset by button on the EzUHF transmitter
Contenu de la livraison :

  • Récepteur 8 voies diversity EzUHH
  • 2x antennes
  • 1x cordon


This is an ImmersionRC EzUHF 8 Channel Diversity Receiver. This high end EzUHF receiver features eight Servo Outputs, with 12 channel PPM capability. This is combined with diversity antenna inputs to increase range and reliability. 


A Full Featured Long Range System 
When 2.4GHz R/C systems run out of steam, UHF Long Range Systems (LRS) are ready for more. The EzUHF system has proven performance, and is a top choice among long-range FPV experts. 


Built-in Spectrum Analyzer 
The only commercial LRS to include this essential feature; a built-in Spectrum Analyzer. This essential tool may be used to ensure that a model emits no interfering emissions on the UHF band, which could reduce range. Plug in a standard USB cable, install the free ImmersionRC Tools, and create charts of power emitted on the UHF spectrum.


Arbitary Channel Mapping 
Using the ImmersionRC Tools, the servo outputs of the EzUHF 8 channel receiver may be arbitrarily remapped to suit the target model. Multicopter wiring may be greatly simplified using a single PPM cable, and easily configured using the tools. Need PWM outputs to drive Pan/Tilt servos? No problem using these tools.


Uplink Status (UPSTAT) 
All uplink status is available in the single-cable PPM stream for use by supported OSDs. The XuGong v2/Pro, or XuGong Vortex both take advantage of this method to show critical uplink status on-screen. The received signal strength (RSSI) of the receiver’s antenna, along with the link quality, are captured by the OSD, and displayed with appropriate alarms to indicate marginal conditions. NOTE: EzUHF Firmware v1.51 or later required to support single-cable UPSTAT. 


Simple Failsafe 
Setting the failsafe on the EzUHF is as simple as pressing a button on the back of the transmitter during flight. Set your model into a gentle turn, drop the throttle, and set the failsafe. In the unlikely situation where the uplink is lost, the model will safely glide to the ground. On a multicopter, the UHF failsafe will trigger the flight controller’s failsafe, and for most systems will start the RTH (Return to Home). 


Features :

Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
-112dBm Sensitivty
SAW filtered input, eliminates nearby high-power video Tx interference
Multicopter mode, emits up to 12 channels of PPM on a chosen channel
8 standard servo connectors
USB port for future upgrades


Specifications : 


  • R/C Channels: Maximum of 12 PPM, 8 servo outputs (future upgrade to 16 PPM channels) 
  • RF Impedance: 50 ohms 
  • Modulation: GFSK 
  • Hopping: 20 of 40 slots, 2MHz, or 20MHz frequency spread (Extreme Hopping) 
  • Frequency Band (Std. Firmware): 431-433MHz, 433-435MHz, 435-437MHz, 436-438MHz, 430-450MHz (Extreme Hopping) 
  • Frequency Band (UK Firmware): 459MHz 
  • Length: 70mm 
  • Width: 30mm 
  • Height: 17mm 
  • Weight: 22g 
  • Power Requirements: 4-6v DC


Retour en haut
Notes et avis

Avis des internautes sur Récepteur 8 voies Diversity EzUHF 433MHz Immersion RC (0 avis)

Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
[Ajouter votre commentaire]
Retour en haut
L’administrateur du site est actuellement en ligne! Discuter